From kazempoor at ph.iut.ac.ir Mon Mar 1 16:05:22 2010 From: kazempoor at ph.iut.ac.ir (kazempoor at ph.iut.ac.ir) Date: Mon, 1 Mar 2010 18:35:22 +0330 (IRST) Subject: [Sax-project-users] band order Message-ID: <624776457.57128.1267455922872.JavaMail.root@mta.iut.ac.ir> Dear all I am using espresso in conjunction with sax to correct the defect states were produced by oxygen vacancy, but I found that the defect states fall above conduction band. I have two questions: 1-With this condition do I use use GW to correct the states or not 2- In espresso we see that the band are arranged according to their energies in each k-point. Does the Corrected band by GW also arranged by their energies or they arranged by their occupations? I ask this because I saw that bands in my system was not ordered by their energies? thanks a lot Ali Kazempour Physics Department, Isfahan University of Technology From liusp0301 at gmail.com Wed Mar 24 08:47:49 2010 From: liusp0301 at gmail.com (Shuangping Liu) Date: Wed, 24 Mar 2010 15:47:49 +0800 Subject: [Sax-project-users] Problems Compiling SaX Message-ID: <6dda9a6a1003240047w29982819naecc174e4f6e79db@mail.gmail.com> Dear developers, I have some problems when compiling SaX: (Compiling environment: Intel C++ and Fortran Compiler, Intel MKL library) 1. When type in "make allmake", I always receive information: ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)', ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file. Here is the information I get from this command: IDE/IDE_makemake.sh make -f Makefile allmake_ make[1]: Entering directory `/home/liuhr/QE/sax-1.0.1' IDE/makemake.sh blas /home/liuhr/QE/sax-1.0.1 IDE/makemake.sh fftw /home/liuhr/QE/sax-1.0.1 IDE/makemake.sh iotk ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file /home/liuhr/QE/sax-1.0.1 example1.o : @iotk_module@ example2.o : @iotk_module@ example3.o : @iotk_module@ example4.o : @iotk_module@ iotk_copy.o : @iotk_files_interf@ iotk_copy.o : @iotk_module@ test.o : @iotk_module@ test2.o : @iotk_module@ test3.o : @iotk_module@ test4.o : @iotk_base@ test4.o : @iotk_error_interf@ test5.o : @iotk_module@ test5.o : @iotk_xtox_interf@ test6.o : @iotk_module@ test7.o : @iotk_misc_interf@ test7.o : @iotk_module@ test7.o : @iotk_str_interf@ test8.o : @iotk_module@ test8.o : @iotk_stream_interf@ test9.o : @iotk_module@ test9.o : @iotk_unit_list_module@ WARNING: modules not found in directories: ../include IDE/makemake.sh numrec ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file /home/liuhr/QE/sax-1.0.1 IDE/makemake.sh ptk ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file /home/liuhr/QE/sax-1.0.1 test.o : @ptk_module@ WARNING: modules not found in directories: ../include IDE/makemake.sh lapack /home/liuhr/QE/sax-1.0.1 IDE/makemake.sh ffti /home/liuhr/QE/sax-1.0.1 IDE/makemake.sh lasi /home/liuhr/QE/sax-1.0.1 IDE/makemake.sh sax ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file /home/liuhr/QE/sax-1.0.1 bse.o : @iotk_module@ bse.o : @ptk_module@ bse_options_module.o : @iotk_module@ bse_options_module.o : @ptk_module@ extract_wfc.o : @iotk_module@ gw.o : @iotk_module@ gw.o : @ptk_module@ gw_options_module.o : @iotk_module@ gw_options_module.o : @ptk_module@ mem_options_module.o : @iotk_module@ mem_options_module.o : @ptk_module@ memory.o : @iotk_module@ memory.o : @ptk_module@ num_la_parall_module.o : @ptk_module@ num_module.o : @num_interpolation_module@ num_special_module.o : @num_interpolation_module@ num_special_module.o : @numrec_module@ pptools.o : @iotk_module@ pptools.o : @ptk_module@ pptools_options_module.o : @iotk_module@ pptools_options_module.o : @ptk_module@ pw_QP_module.o : @iotk_module@ pw_QP_module.o : @ptk_module@ pw_QP_states_extern.o : @ptk_module@ pw_QP_states_interf.o : @ptk_module@ pw_QP_states_type.o : @ptk_module@ pw_atoms_module.o : @iotk_module@ pw_atoms_module.o : @ptk_module@ pw_basis_external.o : @iotk_module@ pw_basis_external.o : @ptk_module@ pw_basis_module.o : @iotk_module@ pw_basis_module.o : @numrec_module@ pw_basis_module.o : @ptk_module@ pw_bse_extern.o : @iotk_module@ pw_bse_extern.o : @ptk_module@ pw_bse_interf.o : @ptk_module@ pw_common_module.o : @ptk_module@ pw_density_module.o : @iotk_module@ pw_dipole_module.o : @iotk_module@ pw_epsilon_macro_extern.o : @iotk_module@ pw_epsilon_macro_extern.o : @ptk_module@ pw_epsilon_macro_interf.o : @iotk_module@ pw_epsilon_macro_interf.o : @ptk_module@ pw_epsilon_macro_type.o : @ptk_module@ pw_hartree_module.o : @iotk_module@ pw_kmesh_module.o : @iotk_module@ pw_kmesh_module.o : @ptk_module@ pw_parall_matrix_extern.o : @iotk_module@ pw_parall_matrix_extern.o : @ptk_module@ pw_parall_matrix_interf.o : @ptk_module@ pw_parall_matrix_type.o : @ptk_module@ pw_polar_extern.o : @iotk_module@ pw_polar_extern.o : @ptk_module@ pw_polar_interf.o : @ptk_module@ pw_polar_type.o : @ptk_module@ pw_pp_parameters_extern.o : @iotk_module@ pw_pp_parameters_extern.o : @ptk_module@ pw_pp_parameters_interf.o : @ptk_module@ pw_pp_parameters_type.o : @ptk_module@ pw_pptools_extern.o : @iotk_module@ pw_pptools_extern.o : @ptk_module@ pw_pptools_interf.o : @iotk_module@ pw_pptools_interf.o : @ptk_module@ pw_pseudo_module.o : @iotk_module@ pw_pseudo_module.o : @ptk_module@ pw_sigma_extern.o : @iotk_module@ pw_sigma_extern.o : @ptk_module@ pw_sigma_extern.o : @ptk_mpi_module@ pw_sigma_interf.o : @iotk_module@ pw_sigma_interf.o : @ptk_module@ pw_sigma_interf.o : @ptk_mpi_module@ pw_states_extern.o : @iotk_module@ pw_states_extern.o : @numrec_module@ pw_states_extern.o : @ptk_module@ pw_states_interf.o : @ptk_module@ pw_states_type.o : @ptk_module@ pw_struct_module.o : @iotk_module@ pw_struct_module.o : @ptk_module@ pw_symm_module.o : @ptk_module@ pw_symmlist_module.o : @ptk_module@ pw_w_extern.o : @iotk_module@ pw_w_extern.o : @ptk_module@ pw_w_interf.o : @ptk_module@ pw_w_type.o : @ptk_module@ pw_wfc6d_module.o : @iotk_module@ pw_wfc6d_module.o : @ptk_module@ pw_wfc_module.o : @iotk_module@ pw_wfc_module.o : @ptk_module@ pw_wfcb_module.o : @iotk_module@ sax_to_want_module.o : @iotk_module@ spectra.o : @iotk_module@ spectra.o : @ptk_module@ spectra_options_module.o : @iotk_module@ spectra_options_module.o : @ptk_module@ tools_error.o : @ptk_module@ tools_log_module.o : @iotk_module@ tools_log_module.o : @ptk_module@ tools_mallinfo_module.o : @ptk_module@ WARNING: modules not found in directories: ../include ../../blas/src ../../blas/include ../../fftw/src ../../fftw/include ../../iotk/src ../../iotk/include ../../numrec/src ../../numrec/include ../../ptk/src ../../ptk/include ../../lapack/src ../../lapack/include ../../ffti/src ../../ffti/include ../../lasi/src ../../lasi/include make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1' 2. After this, I enter ./sax/src, and then "make all', but finally there is an error: make[2]: Leaving directory `/home/liuhr/QE/sax-1.0.1/lasi/src' make[1]: *** No rule to make target `@iotk_module@', needed by `bse_options_module.o'. Stop. make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1/sax/src' make: *** [all] Error 2 Any ideas? Thanks a lot. Shuangping Liu -- Shuangping Liu Department of Physics, Fudan University 220# Handan Rd., Shanghai, 200433, China Tel: 86 13621865544 E-mail: liusp0301 at gmail.com MSN: liusp0301 at msn.com From bussi at sissa.it Wed Mar 24 09:16:44 2010 From: bussi at sissa.it (Giovanni Bussi) Date: Wed, 24 Mar 2010 09:16:44 +0100 Subject: [Sax-project-users] Problems Compiling SaX In-Reply-To: <6dda9a6a1003240047w29982819naecc174e4f6e79db@mail.gmail.com> References: <6dda9a6a1003240047w29982819naecc174e4f6e79db@mail.gmail.com> Message-ID: <3297c3ca1003240116s7f9db26ax71e513627ea214f8@mail.gmail.com> Dear Shuangping, I think that you have a buggy version of bash. Can you please tell me the output of the command "bash --version" on your system? Giovanni On Wed, Mar 24, 2010 at 8:47 AM, Shuangping Liu wrote: > Dear developers, > > I have some problems when compiling SaX: (Compiling environment: Intel C++ > and Fortran Compiler, Intel MKL library) > > 1. When type in "make allmake", I always receive > information: ../../IDE/bin/sprep: line 59: unexpected EOF while looking for > matching `)', ../../IDE/bin/sprep: line 639: syntax error: unexpected end of > file. Here is the information I get from this command: > > IDE/IDE_makemake.sh > make -f Makefile allmake_ > make[1]: Entering directory `/home/liuhr/QE/sax-1.0.1' > IDE/makemake.sh blas > /home/liuhr/QE/sax-1.0.1 > IDE/makemake.sh fftw > /home/liuhr/QE/sax-1.0.1 > IDE/makemake.sh iotk > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > /home/liuhr/QE/sax-1.0.1 > example1.o : @iotk_module@ > example2.o : @iotk_module@ > example3.o : @iotk_module@ > example4.o : @iotk_module@ > iotk_copy.o : @iotk_files_interf@ > iotk_copy.o : @iotk_module@ > test.o : @iotk_module@ > test2.o : @iotk_module@ > test3.o : @iotk_module@ > test4.o : @iotk_base@ > test4.o : @iotk_error_interf@ > test5.o : @iotk_module@ > test5.o : @iotk_xtox_interf@ > test6.o : @iotk_module@ > test7.o : @iotk_misc_interf@ > test7.o : @iotk_module@ > test7.o : @iotk_str_interf@ > test8.o : @iotk_module@ > test8.o : @iotk_stream_interf@ > test9.o : @iotk_module@ > test9.o : @iotk_unit_list_module@ > WARNING: modules not found in directories: > ? ? ? ? ../include > IDE/makemake.sh numrec > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > /home/liuhr/QE/sax-1.0.1 > IDE/makemake.sh ptk > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > /home/liuhr/QE/sax-1.0.1 > test.o : @ptk_module@ > WARNING: modules not found in directories: > ? ? ? ? ../include > IDE/makemake.sh lapack > /home/liuhr/QE/sax-1.0.1 > IDE/makemake.sh ffti > /home/liuhr/QE/sax-1.0.1 > IDE/makemake.sh lasi > /home/liuhr/QE/sax-1.0.1 > IDE/makemake.sh sax > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching `)' > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > /home/liuhr/QE/sax-1.0.1 > bse.o : @iotk_module@ > bse.o : @ptk_module@ > bse_options_module.o : @iotk_module@ > bse_options_module.o : @ptk_module@ > extract_wfc.o : @iotk_module@ > gw.o : @iotk_module@ > gw.o : @ptk_module@ > gw_options_module.o : @iotk_module@ > gw_options_module.o : @ptk_module@ > mem_options_module.o : @iotk_module@ > mem_options_module.o : @ptk_module@ > memory.o : @iotk_module@ > memory.o : @ptk_module@ > num_la_parall_module.o : @ptk_module@ > num_module.o : @num_interpolation_module@ > num_special_module.o : @num_interpolation_module@ > num_special_module.o : @numrec_module@ > pptools.o : @iotk_module@ > pptools.o : @ptk_module@ > pptools_options_module.o : @iotk_module@ > pptools_options_module.o : @ptk_module@ > pw_QP_module.o : @iotk_module@ > pw_QP_module.o : @ptk_module@ > pw_QP_states_extern.o : @ptk_module@ > pw_QP_states_interf.o : @ptk_module@ > pw_QP_states_type.o : @ptk_module@ > pw_atoms_module.o : @iotk_module@ > pw_atoms_module.o : @ptk_module@ > pw_basis_external.o : @iotk_module@ > pw_basis_external.o : @ptk_module@ > pw_basis_module.o : @iotk_module@ > pw_basis_module.o : @numrec_module@ > pw_basis_module.o : @ptk_module@ > pw_bse_extern.o : @iotk_module@ > pw_bse_extern.o : @ptk_module@ > pw_bse_interf.o : @ptk_module@ > pw_common_module.o : @ptk_module@ > pw_density_module.o : @iotk_module@ > pw_dipole_module.o : @iotk_module@ > pw_epsilon_macro_extern.o : @iotk_module@ > pw_epsilon_macro_extern.o : @ptk_module@ > pw_epsilon_macro_interf.o : @iotk_module@ > pw_epsilon_macro_interf.o : @ptk_module@ > pw_epsilon_macro_type.o : @ptk_module@ > pw_hartree_module.o : @iotk_module@ > pw_kmesh_module.o : @iotk_module@ > pw_kmesh_module.o : @ptk_module@ > pw_parall_matrix_extern.o : @iotk_module@ > pw_parall_matrix_extern.o : @ptk_module@ > pw_parall_matrix_interf.o : @ptk_module@ > pw_parall_matrix_type.o : @ptk_module@ > pw_polar_extern.o : @iotk_module@ > pw_polar_extern.o : @ptk_module@ > pw_polar_interf.o : @ptk_module@ > pw_polar_type.o : @ptk_module@ > pw_pp_parameters_extern.o : @iotk_module@ > pw_pp_parameters_extern.o : @ptk_module@ > pw_pp_parameters_interf.o : @ptk_module@ > pw_pp_parameters_type.o : @ptk_module@ > pw_pptools_extern.o : @iotk_module@ > pw_pptools_extern.o : @ptk_module@ > pw_pptools_interf.o : @iotk_module@ > pw_pptools_interf.o : @ptk_module@ > pw_pseudo_module.o : @iotk_module@ > pw_pseudo_module.o : @ptk_module@ > pw_sigma_extern.o : @iotk_module@ > pw_sigma_extern.o : @ptk_module@ > pw_sigma_extern.o : @ptk_mpi_module@ > pw_sigma_interf.o : @iotk_module@ > pw_sigma_interf.o : @ptk_module@ > pw_sigma_interf.o : @ptk_mpi_module@ > pw_states_extern.o : @iotk_module@ > pw_states_extern.o : @numrec_module@ > pw_states_extern.o : @ptk_module@ > pw_states_interf.o : @ptk_module@ > pw_states_type.o : @ptk_module@ > pw_struct_module.o : @iotk_module@ > pw_struct_module.o : @ptk_module@ > pw_symm_module.o : @ptk_module@ > pw_symmlist_module.o : @ptk_module@ > pw_w_extern.o : @iotk_module@ > pw_w_extern.o : @ptk_module@ > pw_w_interf.o : @ptk_module@ > pw_w_type.o : @ptk_module@ > pw_wfc6d_module.o : @iotk_module@ > pw_wfc6d_module.o : @ptk_module@ > pw_wfc_module.o : @iotk_module@ > pw_wfc_module.o : @ptk_module@ > pw_wfcb_module.o : @iotk_module@ > sax_to_want_module.o : @iotk_module@ > spectra.o : @iotk_module@ > spectra.o : @ptk_module@ > spectra_options_module.o : @iotk_module@ > spectra_options_module.o : @ptk_module@ > tools_error.o : @ptk_module@ > tools_log_module.o : @iotk_module@ > tools_log_module.o : @ptk_module@ > tools_mallinfo_module.o : @ptk_module@ > WARNING: modules not found in directories: > ? ? ? ? ../include ../../blas/src ../../blas/include ../../fftw/src > ../../fftw/include ../../iotk/src ../../iotk/include ../../numrec/src > ../../numrec/include ../../ptk/src ../../ptk/include ../../lapack/src > ../../lapack/include ../../ffti/src ../../ffti/include ../../lasi/src > ../../lasi/include > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1' > > 2. After this, I enter ./sax/src, and then "make all', but finally there is > an error: > > make[2]: Leaving directory `/home/liuhr/QE/sax-1.0.1/lasi/src' > make[1]: *** No rule to make target `@iotk_module@', needed by > `bse_options_module.o'. ?Stop. > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1/sax/src' > make: *** [all] Error 2 > > Any ideas? > > Thanks a lot. > > Shuangping Liu > -- > Shuangping Liu > Department of Physics, Fudan University > 220# Handan Rd., Shanghai, 200433, China > Tel: 86 13621865544 > E-mail: liusp0301 at gmail.com > MSN: liusp0301 at msn.com > _______________________________________________ > Sax-project-users mailing list > Sax-project-users at qe-forge.org > http://qe-forge.org/mailman/listinfo/sax-project-users > From liusp0301 at gmail.com Wed Mar 24 09:20:07 2010 From: liusp0301 at gmail.com (Shuangping Liu) Date: Wed, 24 Mar 2010 16:20:07 +0800 Subject: [Sax-project-users] Problems Compiling SaX In-Reply-To: <3297c3ca1003240116s7f9db26ax71e513627ea214f8@mail.gmail.com> References: <6dda9a6a1003240047w29982819naecc174e4f6e79db@mail.gmail.com> <3297c3ca1003240116s7f9db26ax71e513627ea214f8@mail.gmail.com> Message-ID: <6dda9a6a1003240120j2a7a8a84q61259d6968cfdf9a@mail.gmail.com> Dear Giovanni Bussi, Thanks for your reply. I use Kubuntu 9.10, and here is my bash information: GNU bash, version 4.0.33(1)-release (x86_64-pc-linux-gnu) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software; you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. On Wed, Mar 24, 2010 at 4:16 PM, Giovanni Bussi wrote: > Dear Shuangping, > > I think that you have a buggy version of bash. > > Can you please tell me the output of the command "bash --version" on > your system? > > Giovanni > > On Wed, Mar 24, 2010 at 8:47 AM, Shuangping Liu > wrote: > > Dear developers, > > > > I have some problems when compiling SaX: (Compiling environment: Intel > C++ > > and Fortran Compiler, Intel MKL library) > > > > 1. When type in "make allmake", I always receive > > information: ../../IDE/bin/sprep: line 59: unexpected EOF while looking > for > > matching `)', ../../IDE/bin/sprep: line 639: syntax error: unexpected end > of > > file. Here is the information I get from this command: > > > > IDE/IDE_makemake.sh > > make -f Makefile allmake_ > > make[1]: Entering directory `/home/liuhr/QE/sax-1.0.1' > > IDE/makemake.sh blas > > /home/liuhr/QE/sax-1.0.1 > > IDE/makemake.sh fftw > > /home/liuhr/QE/sax-1.0.1 > > IDE/makemake.sh iotk > > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching > `)' > > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching > `)' > > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > > /home/liuhr/QE/sax-1.0.1 > > example1.o : @iotk_module@ > > example2.o : @iotk_module@ > > example3.o : @iotk_module@ > > example4.o : @iotk_module@ > > iotk_copy.o : @iotk_files_interf@ > > iotk_copy.o : @iotk_module@ > > test.o : @iotk_module@ > > test2.o : @iotk_module@ > > test3.o : @iotk_module@ > > test4.o : @iotk_base@ > > test4.o : @iotk_error_interf@ > > test5.o : @iotk_module@ > > test5.o : @iotk_xtox_interf@ > > test6.o : @iotk_module@ > > test7.o : @iotk_misc_interf@ > > test7.o : @iotk_module@ > > test7.o : @iotk_str_interf@ > > test8.o : @iotk_module@ > > test8.o : @iotk_stream_interf@ > > test9.o : @iotk_module@ > > test9.o : @iotk_unit_list_module@ > > WARNING: modules not found in directories: > > ../include > > IDE/makemake.sh numrec > > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching > `)' > > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > > /home/liuhr/QE/sax-1.0.1 > > IDE/makemake.sh ptk > > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching > `)' > > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > > /home/liuhr/QE/sax-1.0.1 > > test.o : @ptk_module@ > > WARNING: modules not found in directories: > > ../include > > IDE/makemake.sh lapack > > /home/liuhr/QE/sax-1.0.1 > > IDE/makemake.sh ffti > > /home/liuhr/QE/sax-1.0.1 > > IDE/makemake.sh lasi > > /home/liuhr/QE/sax-1.0.1 > > IDE/makemake.sh sax > > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching > `)' > > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > > /home/liuhr/QE/sax-1.0.1 > > bse.o : @iotk_module@ > > bse.o : @ptk_module@ > > bse_options_module.o : @iotk_module@ > > bse_options_module.o : @ptk_module@ > > extract_wfc.o : @iotk_module@ > > gw.o : @iotk_module@ > > gw.o : @ptk_module@ > > gw_options_module.o : @iotk_module@ > > gw_options_module.o : @ptk_module@ > > mem_options_module.o : @iotk_module@ > > mem_options_module.o : @ptk_module@ > > memory.o : @iotk_module@ > > memory.o : @ptk_module@ > > num_la_parall_module.o : @ptk_module@ > > num_module.o : @num_interpolation_module@ > > num_special_module.o : @num_interpolation_module@ > > num_special_module.o : @numrec_module@ > > pptools.o : @iotk_module@ > > pptools.o : @ptk_module@ > > pptools_options_module.o : @iotk_module@ > > pptools_options_module.o : @ptk_module@ > > pw_QP_module.o : @iotk_module@ > > pw_QP_module.o : @ptk_module@ > > pw_QP_states_extern.o : @ptk_module@ > > pw_QP_states_interf.o : @ptk_module@ > > pw_QP_states_type.o : @ptk_module@ > > pw_atoms_module.o : @iotk_module@ > > pw_atoms_module.o : @ptk_module@ > > pw_basis_external.o : @iotk_module@ > > pw_basis_external.o : @ptk_module@ > > pw_basis_module.o : @iotk_module@ > > pw_basis_module.o : @numrec_module@ > > pw_basis_module.o : @ptk_module@ > > pw_bse_extern.o : @iotk_module@ > > pw_bse_extern.o : @ptk_module@ > > pw_bse_interf.o : @ptk_module@ > > pw_common_module.o : @ptk_module@ > > pw_density_module.o : @iotk_module@ > > pw_dipole_module.o : @iotk_module@ > > pw_epsilon_macro_extern.o : @iotk_module@ > > pw_epsilon_macro_extern.o : @ptk_module@ > > pw_epsilon_macro_interf.o : @iotk_module@ > > pw_epsilon_macro_interf.o : @ptk_module@ > > pw_epsilon_macro_type.o : @ptk_module@ > > pw_hartree_module.o : @iotk_module@ > > pw_kmesh_module.o : @iotk_module@ > > pw_kmesh_module.o : @ptk_module@ > > pw_parall_matrix_extern.o : @iotk_module@ > > pw_parall_matrix_extern.o : @ptk_module@ > > pw_parall_matrix_interf.o : @ptk_module@ > > pw_parall_matrix_type.o : @ptk_module@ > > pw_polar_extern.o : @iotk_module@ > > pw_polar_extern.o : @ptk_module@ > > pw_polar_interf.o : @ptk_module@ > > pw_polar_type.o : @ptk_module@ > > pw_pp_parameters_extern.o : @iotk_module@ > > pw_pp_parameters_extern.o : @ptk_module@ > > pw_pp_parameters_interf.o : @ptk_module@ > > pw_pp_parameters_type.o : @ptk_module@ > > pw_pptools_extern.o : @iotk_module@ > > pw_pptools_extern.o : @ptk_module@ > > pw_pptools_interf.o : @iotk_module@ > > pw_pptools_interf.o : @ptk_module@ > > pw_pseudo_module.o : @iotk_module@ > > pw_pseudo_module.o : @ptk_module@ > > pw_sigma_extern.o : @iotk_module@ > > pw_sigma_extern.o : @ptk_module@ > > pw_sigma_extern.o : @ptk_mpi_module@ > > pw_sigma_interf.o : @iotk_module@ > > pw_sigma_interf.o : @ptk_module@ > > pw_sigma_interf.o : @ptk_mpi_module@ > > pw_states_extern.o : @iotk_module@ > > pw_states_extern.o : @numrec_module@ > > pw_states_extern.o : @ptk_module@ > > pw_states_interf.o : @ptk_module@ > > pw_states_type.o : @ptk_module@ > > pw_struct_module.o : @iotk_module@ > > pw_struct_module.o : @ptk_module@ > > pw_symm_module.o : @ptk_module@ > > pw_symmlist_module.o : @ptk_module@ > > pw_w_extern.o : @iotk_module@ > > pw_w_extern.o : @ptk_module@ > > pw_w_interf.o : @ptk_module@ > > pw_w_type.o : @ptk_module@ > > pw_wfc6d_module.o : @iotk_module@ > > pw_wfc6d_module.o : @ptk_module@ > > pw_wfc_module.o : @iotk_module@ > > pw_wfc_module.o : @ptk_module@ > > pw_wfcb_module.o : @iotk_module@ > > sax_to_want_module.o : @iotk_module@ > > spectra.o : @iotk_module@ > > spectra.o : @ptk_module@ > > spectra_options_module.o : @iotk_module@ > > spectra_options_module.o : @ptk_module@ > > tools_error.o : @ptk_module@ > > tools_log_module.o : @iotk_module@ > > tools_log_module.o : @ptk_module@ > > tools_mallinfo_module.o : @ptk_module@ > > WARNING: modules not found in directories: > > ../include ../../blas/src ../../blas/include ../../fftw/src > > ../../fftw/include ../../iotk/src ../../iotk/include ../../numrec/src > > ../../numrec/include ../../ptk/src ../../ptk/include ../../lapack/src > > ../../lapack/include ../../ffti/src ../../ffti/include ../../lasi/src > > ../../lasi/include > > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1' > > > > 2. After this, I enter ./sax/src, and then "make all', but finally there > is > > an error: > > > > make[2]: Leaving directory `/home/liuhr/QE/sax-1.0.1/lasi/src' > > make[1]: *** No rule to make target `@iotk_module@', needed by > > `bse_options_module.o'. Stop. > > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1/sax/src' > > make: *** [all] Error 2 > > > > Any ideas? > > > > Thanks a lot. > > > > Shuangping Liu > > -- > > Shuangping Liu > > Department of Physics, Fudan University > > 220# Handan Rd., Shanghai, 200433, China > > Tel: 86 13621865544 > > E-mail: liusp0301 at gmail.com > > MSN: liusp0301 at msn.com > > _______________________________________________ > > Sax-project-users mailing list > > Sax-project-users at qe-forge.org > > http://qe-forge.org/mailman/listinfo/sax-project-users > > > -- Shuangping Liu Department of Physics, Fudan University 220# Handan Rd., Shanghai, 200433, China Tel: 86 13621865544 E-mail: liusp0301 at gmail.com MSN: liusp0301 at msn.com From bussi at sissa.it Wed Mar 24 09:33:41 2010 From: bussi at sissa.it (Giovanni Bussi) Date: Wed, 24 Mar 2010 09:33:41 +0100 Subject: [Sax-project-users] Problems Compiling SaX In-Reply-To: <6dda9a6a1003240120j2a7a8a84q61259d6968cfdf9a@mail.gmail.com> References: <6dda9a6a1003240047w29982819naecc174e4f6e79db@mail.gmail.com> <3297c3ca1003240116s7f9db26ax71e513627ea214f8@mail.gmail.com> <6dda9a6a1003240120j2a7a8a84q61259d6968cfdf9a@mail.gmail.com> Message-ID: <3297c3ca1003240133t2356acabt84883ce3b8fd7ebf@mail.gmail.com> On my laptop I have bash 4.0 (same as you) which has a bug. You can verify the bug typing "bash bug.bash" (using the file attached). If you receive an error, you have a buggy bash In case you have a buggy bash, I suggest you to install either bash 3 or bash 4.1 (I just tried, and it seems they solved the problem at some stage). Just get it from here http://ftp.gnu.org/gnu/bash/, download and apply the patches from here http://ftp.gnu.org/gnu/bash/bash-4.1-patches/, and compile it with "configure ; make" as usual. Then you can verify that the bug disappeard with "/path-to-bash/bash-4.1/bash bug.bash". You should not receive any error now. Now, before recompiling SaX, add to your environment the location of the correct bash, something like: export BASH_LOCATION=/path-to-bash/bash-4.1/bash followed by "make allmake" Let me know if you succeded... Giovanni On Wed, Mar 24, 2010 at 9:20 AM, Shuangping Liu wrote: > Dear Giovanni Bussi, > > Thanks for your reply. I use Kubuntu 9.10, and here is my bash information: > > GNU bash, version 4.0.33(1)-release (x86_64-pc-linux-gnu) > Copyright (C) 2009 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > > > This is free software; you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > > On Wed, Mar 24, 2010 at 4:16 PM, Giovanni Bussi wrote: > >> Dear Shuangping, >> >> I think that you have a buggy version of bash. >> >> Can you please tell me the output of the command "bash --version" on >> your system? >> >> Giovanni >> >> On Wed, Mar 24, 2010 at 8:47 AM, Shuangping Liu >> wrote: >> > Dear developers, >> > >> > I have some problems when compiling SaX: (Compiling environment: Intel >> C++ >> > and Fortran Compiler, Intel MKL library) >> > >> > 1. When type in "make allmake", I always receive >> > information: ../../IDE/bin/sprep: line 59: unexpected EOF while looking >> for >> > matching `)', ../../IDE/bin/sprep: line 639: syntax error: unexpected end >> of >> > file. Here is the information I get from this command: >> > >> > IDE/IDE_makemake.sh >> > make -f Makefile allmake_ >> > make[1]: Entering directory `/home/liuhr/QE/sax-1.0.1' >> > IDE/makemake.sh blas >> > /home/liuhr/QE/sax-1.0.1 >> > IDE/makemake.sh fftw >> > /home/liuhr/QE/sax-1.0.1 >> > IDE/makemake.sh iotk >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching >> `)' >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching >> `)' >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file >> > /home/liuhr/QE/sax-1.0.1 >> > example1.o : @iotk_module@ >> > example2.o : @iotk_module@ >> > example3.o : @iotk_module@ >> > example4.o : @iotk_module@ >> > iotk_copy.o : @iotk_files_interf@ >> > iotk_copy.o : @iotk_module@ >> > test.o : @iotk_module@ >> > test2.o : @iotk_module@ >> > test3.o : @iotk_module@ >> > test4.o : @iotk_base@ >> > test4.o : @iotk_error_interf@ >> > test5.o : @iotk_module@ >> > test5.o : @iotk_xtox_interf@ >> > test6.o : @iotk_module@ >> > test7.o : @iotk_misc_interf@ >> > test7.o : @iotk_module@ >> > test7.o : @iotk_str_interf@ >> > test8.o : @iotk_module@ >> > test8.o : @iotk_stream_interf@ >> > test9.o : @iotk_module@ >> > test9.o : @iotk_unit_list_module@ >> > WARNING: modules not found in directories: >> > ? ? ? ? ../include >> > IDE/makemake.sh numrec >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching >> `)' >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file >> > /home/liuhr/QE/sax-1.0.1 >> > IDE/makemake.sh ptk >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching >> `)' >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file >> > /home/liuhr/QE/sax-1.0.1 >> > test.o : @ptk_module@ >> > WARNING: modules not found in directories: >> > ? ? ? ? ../include >> > IDE/makemake.sh lapack >> > /home/liuhr/QE/sax-1.0.1 >> > IDE/makemake.sh ffti >> > /home/liuhr/QE/sax-1.0.1 >> > IDE/makemake.sh lasi >> > /home/liuhr/QE/sax-1.0.1 >> > IDE/makemake.sh sax >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for matching >> `)' >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file >> > /home/liuhr/QE/sax-1.0.1 >> > bse.o : @iotk_module@ >> > bse.o : @ptk_module@ >> > bse_options_module.o : @iotk_module@ >> > bse_options_module.o : @ptk_module@ >> > extract_wfc.o : @iotk_module@ >> > gw.o : @iotk_module@ >> > gw.o : @ptk_module@ >> > gw_options_module.o : @iotk_module@ >> > gw_options_module.o : @ptk_module@ >> > mem_options_module.o : @iotk_module@ >> > mem_options_module.o : @ptk_module@ >> > memory.o : @iotk_module@ >> > memory.o : @ptk_module@ >> > num_la_parall_module.o : @ptk_module@ >> > num_module.o : @num_interpolation_module@ >> > num_special_module.o : @num_interpolation_module@ >> > num_special_module.o : @numrec_module@ >> > pptools.o : @iotk_module@ >> > pptools.o : @ptk_module@ >> > pptools_options_module.o : @iotk_module@ >> > pptools_options_module.o : @ptk_module@ >> > pw_QP_module.o : @iotk_module@ >> > pw_QP_module.o : @ptk_module@ >> > pw_QP_states_extern.o : @ptk_module@ >> > pw_QP_states_interf.o : @ptk_module@ >> > pw_QP_states_type.o : @ptk_module@ >> > pw_atoms_module.o : @iotk_module@ >> > pw_atoms_module.o : @ptk_module@ >> > pw_basis_external.o : @iotk_module@ >> > pw_basis_external.o : @ptk_module@ >> > pw_basis_module.o : @iotk_module@ >> > pw_basis_module.o : @numrec_module@ >> > pw_basis_module.o : @ptk_module@ >> > pw_bse_extern.o : @iotk_module@ >> > pw_bse_extern.o : @ptk_module@ >> > pw_bse_interf.o : @ptk_module@ >> > pw_common_module.o : @ptk_module@ >> > pw_density_module.o : @iotk_module@ >> > pw_dipole_module.o : @iotk_module@ >> > pw_epsilon_macro_extern.o : @iotk_module@ >> > pw_epsilon_macro_extern.o : @ptk_module@ >> > pw_epsilon_macro_interf.o : @iotk_module@ >> > pw_epsilon_macro_interf.o : @ptk_module@ >> > pw_epsilon_macro_type.o : @ptk_module@ >> > pw_hartree_module.o : @iotk_module@ >> > pw_kmesh_module.o : @iotk_module@ >> > pw_kmesh_module.o : @ptk_module@ >> > pw_parall_matrix_extern.o : @iotk_module@ >> > pw_parall_matrix_extern.o : @ptk_module@ >> > pw_parall_matrix_interf.o : @ptk_module@ >> > pw_parall_matrix_type.o : @ptk_module@ >> > pw_polar_extern.o : @iotk_module@ >> > pw_polar_extern.o : @ptk_module@ >> > pw_polar_interf.o : @ptk_module@ >> > pw_polar_type.o : @ptk_module@ >> > pw_pp_parameters_extern.o : @iotk_module@ >> > pw_pp_parameters_extern.o : @ptk_module@ >> > pw_pp_parameters_interf.o : @ptk_module@ >> > pw_pp_parameters_type.o : @ptk_module@ >> > pw_pptools_extern.o : @iotk_module@ >> > pw_pptools_extern.o : @ptk_module@ >> > pw_pptools_interf.o : @iotk_module@ >> > pw_pptools_interf.o : @ptk_module@ >> > pw_pseudo_module.o : @iotk_module@ >> > pw_pseudo_module.o : @ptk_module@ >> > pw_sigma_extern.o : @iotk_module@ >> > pw_sigma_extern.o : @ptk_module@ >> > pw_sigma_extern.o : @ptk_mpi_module@ >> > pw_sigma_interf.o : @iotk_module@ >> > pw_sigma_interf.o : @ptk_module@ >> > pw_sigma_interf.o : @ptk_mpi_module@ >> > pw_states_extern.o : @iotk_module@ >> > pw_states_extern.o : @numrec_module@ >> > pw_states_extern.o : @ptk_module@ >> > pw_states_interf.o : @ptk_module@ >> > pw_states_type.o : @ptk_module@ >> > pw_struct_module.o : @iotk_module@ >> > pw_struct_module.o : @ptk_module@ >> > pw_symm_module.o : @ptk_module@ >> > pw_symmlist_module.o : @ptk_module@ >> > pw_w_extern.o : @iotk_module@ >> > pw_w_extern.o : @ptk_module@ >> > pw_w_interf.o : @ptk_module@ >> > pw_w_type.o : @ptk_module@ >> > pw_wfc6d_module.o : @iotk_module@ >> > pw_wfc6d_module.o : @ptk_module@ >> > pw_wfc_module.o : @iotk_module@ >> > pw_wfc_module.o : @ptk_module@ >> > pw_wfcb_module.o : @iotk_module@ >> > sax_to_want_module.o : @iotk_module@ >> > spectra.o : @iotk_module@ >> > spectra.o : @ptk_module@ >> > spectra_options_module.o : @iotk_module@ >> > spectra_options_module.o : @ptk_module@ >> > tools_error.o : @ptk_module@ >> > tools_log_module.o : @iotk_module@ >> > tools_log_module.o : @ptk_module@ >> > tools_mallinfo_module.o : @ptk_module@ >> > WARNING: modules not found in directories: >> > ? ? ? ? ../include ../../blas/src ../../blas/include ../../fftw/src >> > ../../fftw/include ../../iotk/src ../../iotk/include ../../numrec/src >> > ../../numrec/include ../../ptk/src ../../ptk/include ../../lapack/src >> > ../../lapack/include ../../ffti/src ../../ffti/include ../../lasi/src >> > ../../lasi/include >> > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1' >> > >> > 2. After this, I enter ./sax/src, and then "make all', but finally there >> is >> > an error: >> > >> > make[2]: Leaving directory `/home/liuhr/QE/sax-1.0.1/lasi/src' >> > make[1]: *** No rule to make target `@iotk_module@', needed by >> > `bse_options_module.o'. ?Stop. >> > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1/sax/src' >> > make: *** [all] Error 2 >> > >> > Any ideas? >> > >> > Thanks a lot. >> > >> > Shuangping Liu >> > -- >> > Shuangping Liu >> > Department of Physics, Fudan University >> > 220# Handan Rd., Shanghai, 200433, China >> > Tel: 86 13621865544 >> > E-mail: liusp0301 at gmail.com >> > MSN: liusp0301 at msn.com >> > _______________________________________________ >> > Sax-project-users mailing list >> > Sax-project-users at qe-forge.org >> > http://qe-forge.org/mailman/listinfo/sax-project-users >> > >> > > > > -- > Shuangping Liu > Department of Physics, Fudan University > 220# Handan Rd., Shanghai, 200433, China > Tel: 86 13621865544 > E-mail: liusp0301 at gmail.com > MSN: liusp0301 at msn.com > _______________________________________________ > Sax-project-users mailing list > Sax-project-users at qe-forge.org > http://qe-forge.org/mailman/listinfo/sax-project-users > From liusp0301 at gmail.com Wed Mar 24 20:04:22 2010 From: liusp0301 at gmail.com (Shuangping Liu) Date: Thu, 25 Mar 2010 03:04:22 +0800 Subject: [Sax-project-users] Problems Compiling SaX In-Reply-To: <3297c3ca1003240133t2356acabt84883ce3b8fd7ebf@mail.gmail.com> References: <6dda9a6a1003240047w29982819naecc174e4f6e79db@mail.gmail.com> <3297c3ca1003240116s7f9db26ax71e513627ea214f8@mail.gmail.com> <6dda9a6a1003240120j2a7a8a84q61259d6968cfdf9a@mail.gmail.com> <3297c3ca1003240133t2356acabt84883ce3b8fd7ebf@mail.gmail.com> Message-ID: <6dda9a6a1003241204r19df30d5s3d07d64e3ee99dd0@mail.gmail.com> Thanks a lot for your advice. I have changed my bash to 4.1, and the problem has been solved. Then I met another problem concerned "undefined reference to `mkl_serv_load_fun'"and "undefined reference to `mkl_serv_load_dll'". I googled it and found the solution. Now compilation is ok and I will test it later. On Wed, Mar 24, 2010 at 4:33 PM, Giovanni Bussi wrote: > On my laptop I have bash 4.0 (same as you) which has a bug. You can > verify the bug typing > "bash bug.bash" (using the file attached). If you receive an error, > you have a buggy bash > > In case you have a buggy bash, I suggest you to install either bash 3 > or bash 4.1 (I just tried, and it seems they solved the problem at > some stage). > > Just get it from here http://ftp.gnu.org/gnu/bash/, download and apply > the patches from here http://ftp.gnu.org/gnu/bash/bash-4.1-patches/, > and compile it with "configure ; make" as usual. Then you can verify > that the bug disappeard with "/path-to-bash/bash-4.1/bash bug.bash". > You should not receive any error now. > > Now, before recompiling SaX, add to your environment the location of > the correct bash, something like: > export BASH_LOCATION=/path-to-bash/bash-4.1/bash > followed by "make allmake" > > Let me know if you succeded... > > Giovanni > > > > On Wed, Mar 24, 2010 at 9:20 AM, Shuangping Liu > wrote: > > Dear Giovanni Bussi, > > > > Thanks for your reply. I use Kubuntu 9.10, and here is my bash > information: > > > > GNU bash, version 4.0.33(1)-release (x86_64-pc-linux-gnu) > > Copyright (C) 2009 Free Software Foundation, Inc. > > License GPLv3+: GNU GPL version 3 or later < > http://gnu.org/licenses/gpl.html > >> > > > > This is free software; you are free to change and redistribute it. > > There is NO WARRANTY, to the extent permitted by law. > > > > On Wed, Mar 24, 2010 at 4:16 PM, Giovanni Bussi wrote: > > > >> Dear Shuangping, > >> > >> I think that you have a buggy version of bash. > >> > >> Can you please tell me the output of the command "bash --version" on > >> your system? > >> > >> Giovanni > >> > >> On Wed, Mar 24, 2010 at 8:47 AM, Shuangping Liu > >> wrote: > >> > Dear developers, > >> > > >> > I have some problems when compiling SaX: (Compiling environment: Intel > >> C++ > >> > and Fortran Compiler, Intel MKL library) > >> > > >> > 1. When type in "make allmake", I always receive > >> > information: ../../IDE/bin/sprep: line 59: unexpected EOF while > looking > >> for > >> > matching `)', ../../IDE/bin/sprep: line 639: syntax error: unexpected > end > >> of > >> > file. Here is the information I get from this command: > >> > > >> > IDE/IDE_makemake.sh > >> > make -f Makefile allmake_ > >> > make[1]: Entering directory `/home/liuhr/QE/sax-1.0.1' > >> > IDE/makemake.sh blas > >> > /home/liuhr/QE/sax-1.0.1 > >> > IDE/makemake.sh fftw > >> > /home/liuhr/QE/sax-1.0.1 > >> > IDE/makemake.sh iotk > >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for > matching > >> `)' > >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for > matching > >> `)' > >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > >> > /home/liuhr/QE/sax-1.0.1 > >> > example1.o : @iotk_module@ > >> > example2.o : @iotk_module@ > >> > example3.o : @iotk_module@ > >> > example4.o : @iotk_module@ > >> > iotk_copy.o : @iotk_files_interf@ > >> > iotk_copy.o : @iotk_module@ > >> > test.o : @iotk_module@ > >> > test2.o : @iotk_module@ > >> > test3.o : @iotk_module@ > >> > test4.o : @iotk_base@ > >> > test4.o : @iotk_error_interf@ > >> > test5.o : @iotk_module@ > >> > test5.o : @iotk_xtox_interf@ > >> > test6.o : @iotk_module@ > >> > test7.o : @iotk_misc_interf@ > >> > test7.o : @iotk_module@ > >> > test7.o : @iotk_str_interf@ > >> > test8.o : @iotk_module@ > >> > test8.o : @iotk_stream_interf@ > >> > test9.o : @iotk_module@ > >> > test9.o : @iotk_unit_list_module@ > >> > WARNING: modules not found in directories: > >> > ../include > >> > IDE/makemake.sh numrec > >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for > matching > >> `)' > >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > >> > /home/liuhr/QE/sax-1.0.1 > >> > IDE/makemake.sh ptk > >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for > matching > >> `)' > >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > >> > /home/liuhr/QE/sax-1.0.1 > >> > test.o : @ptk_module@ > >> > WARNING: modules not found in directories: > >> > ../include > >> > IDE/makemake.sh lapack > >> > /home/liuhr/QE/sax-1.0.1 > >> > IDE/makemake.sh ffti > >> > /home/liuhr/QE/sax-1.0.1 > >> > IDE/makemake.sh lasi > >> > /home/liuhr/QE/sax-1.0.1 > >> > IDE/makemake.sh sax > >> > ../../IDE/bin/sprep: line 59: unexpected EOF while looking for > matching > >> `)' > >> > ../../IDE/bin/sprep: line 639: syntax error: unexpected end of file > >> > /home/liuhr/QE/sax-1.0.1 > >> > bse.o : @iotk_module@ > >> > bse.o : @ptk_module@ > >> > bse_options_module.o : @iotk_module@ > >> > bse_options_module.o : @ptk_module@ > >> > extract_wfc.o : @iotk_module@ > >> > gw.o : @iotk_module@ > >> > gw.o : @ptk_module@ > >> > gw_options_module.o : @iotk_module@ > >> > gw_options_module.o : @ptk_module@ > >> > mem_options_module.o : @iotk_module@ > >> > mem_options_module.o : @ptk_module@ > >> > memory.o : @iotk_module@ > >> > memory.o : @ptk_module@ > >> > num_la_parall_module.o : @ptk_module@ > >> > num_module.o : @num_interpolation_module@ > >> > num_special_module.o : @num_interpolation_module@ > >> > num_special_module.o : @numrec_module@ > >> > pptools.o : @iotk_module@ > >> > pptools.o : @ptk_module@ > >> > pptools_options_module.o : @iotk_module@ > >> > pptools_options_module.o : @ptk_module@ > >> > pw_QP_module.o : @iotk_module@ > >> > pw_QP_module.o : @ptk_module@ > >> > pw_QP_states_extern.o : @ptk_module@ > >> > pw_QP_states_interf.o : @ptk_module@ > >> > pw_QP_states_type.o : @ptk_module@ > >> > pw_atoms_module.o : @iotk_module@ > >> > pw_atoms_module.o : @ptk_module@ > >> > pw_basis_external.o : @iotk_module@ > >> > pw_basis_external.o : @ptk_module@ > >> > pw_basis_module.o : @iotk_module@ > >> > pw_basis_module.o : @numrec_module@ > >> > pw_basis_module.o : @ptk_module@ > >> > pw_bse_extern.o : @iotk_module@ > >> > pw_bse_extern.o : @ptk_module@ > >> > pw_bse_interf.o : @ptk_module@ > >> > pw_common_module.o : @ptk_module@ > >> > pw_density_module.o : @iotk_module@ > >> > pw_dipole_module.o : @iotk_module@ > >> > pw_epsilon_macro_extern.o : @iotk_module@ > >> > pw_epsilon_macro_extern.o : @ptk_module@ > >> > pw_epsilon_macro_interf.o : @iotk_module@ > >> > pw_epsilon_macro_interf.o : @ptk_module@ > >> > pw_epsilon_macro_type.o : @ptk_module@ > >> > pw_hartree_module.o : @iotk_module@ > >> > pw_kmesh_module.o : @iotk_module@ > >> > pw_kmesh_module.o : @ptk_module@ > >> > pw_parall_matrix_extern.o : @iotk_module@ > >> > pw_parall_matrix_extern.o : @ptk_module@ > >> > pw_parall_matrix_interf.o : @ptk_module@ > >> > pw_parall_matrix_type.o : @ptk_module@ > >> > pw_polar_extern.o : @iotk_module@ > >> > pw_polar_extern.o : @ptk_module@ > >> > pw_polar_interf.o : @ptk_module@ > >> > pw_polar_type.o : @ptk_module@ > >> > pw_pp_parameters_extern.o : @iotk_module@ > >> > pw_pp_parameters_extern.o : @ptk_module@ > >> > pw_pp_parameters_interf.o : @ptk_module@ > >> > pw_pp_parameters_type.o : @ptk_module@ > >> > pw_pptools_extern.o : @iotk_module@ > >> > pw_pptools_extern.o : @ptk_module@ > >> > pw_pptools_interf.o : @iotk_module@ > >> > pw_pptools_interf.o : @ptk_module@ > >> > pw_pseudo_module.o : @iotk_module@ > >> > pw_pseudo_module.o : @ptk_module@ > >> > pw_sigma_extern.o : @iotk_module@ > >> > pw_sigma_extern.o : @ptk_module@ > >> > pw_sigma_extern.o : @ptk_mpi_module@ > >> > pw_sigma_interf.o : @iotk_module@ > >> > pw_sigma_interf.o : @ptk_module@ > >> > pw_sigma_interf.o : @ptk_mpi_module@ > >> > pw_states_extern.o : @iotk_module@ > >> > pw_states_extern.o : @numrec_module@ > >> > pw_states_extern.o : @ptk_module@ > >> > pw_states_interf.o : @ptk_module@ > >> > pw_states_type.o : @ptk_module@ > >> > pw_struct_module.o : @iotk_module@ > >> > pw_struct_module.o : @ptk_module@ > >> > pw_symm_module.o : @ptk_module@ > >> > pw_symmlist_module.o : @ptk_module@ > >> > pw_w_extern.o : @iotk_module@ > >> > pw_w_extern.o : @ptk_module@ > >> > pw_w_interf.o : @ptk_module@ > >> > pw_w_type.o : @ptk_module@ > >> > pw_wfc6d_module.o : @iotk_module@ > >> > pw_wfc6d_module.o : @ptk_module@ > >> > pw_wfc_module.o : @iotk_module@ > >> > pw_wfc_module.o : @ptk_module@ > >> > pw_wfcb_module.o : @iotk_module@ > >> > sax_to_want_module.o : @iotk_module@ > >> > spectra.o : @iotk_module@ > >> > spectra.o : @ptk_module@ > >> > spectra_options_module.o : @iotk_module@ > >> > spectra_options_module.o : @ptk_module@ > >> > tools_error.o : @ptk_module@ > >> > tools_log_module.o : @iotk_module@ > >> > tools_log_module.o : @ptk_module@ > >> > tools_mallinfo_module.o : @ptk_module@ > >> > WARNING: modules not found in directories: > >> > ../include ../../blas/src ../../blas/include ../../fftw/src > >> > ../../fftw/include ../../iotk/src ../../iotk/include ../../numrec/src > >> > ../../numrec/include ../../ptk/src ../../ptk/include ../../lapack/src > >> > ../../lapack/include ../../ffti/src ../../ffti/include ../../lasi/src > >> > ../../lasi/include > >> > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1' > >> > > >> > 2. After this, I enter ./sax/src, and then "make all', but finally > there > >> is > >> > an error: > >> > > >> > make[2]: Leaving directory `/home/liuhr/QE/sax-1.0.1/lasi/src' > >> > make[1]: *** No rule to make target `@iotk_module@', needed by > >> > `bse_options_module.o'. Stop. > >> > make[1]: Leaving directory `/home/liuhr/QE/sax-1.0.1/sax/src' > >> > make: *** [all] Error 2 > >> > > >> > Any ideas? > >> > > >> > Thanks a lot. > >> > > >> > Shuangping Liu > >> > -- > >> > Shuangping Liu > >> > Department of Physics, Fudan University > >> > 220# Handan Rd., Shanghai, 200433, China > >> > Tel: 86 13621865544 > >> > E-mail: liusp0301 at gmail.com > >> > MSN: liusp0301 at msn.com > >> > _______________________________________________ > >> > Sax-project-users mailing list > >> > Sax-project-users at qe-forge.org > >> > http://qe-forge.org/mailman/listinfo/sax-project-users > >> > > >> > > > > > > > > -- > > Shuangping Liu > > Department of Physics, Fudan University > > 220# Handan Rd., Shanghai, 200433, China > > Tel: 86 13621865544 > > E-mail: liusp0301 at gmail.com > > MSN: liusp0301 at msn.com > > _______________________________________________ > > Sax-project-users mailing list > > Sax-project-users at qe-forge.org > > http://qe-forge.org/mailman/listinfo/sax-project-users > > > -- Shuangping Liu Department of Physics, Fudan University 220# Handan Rd., Shanghai, 200433, China Tel: 86 13621865544 E-mail: liusp0301 at gmail.com MSN: liusp0301 at msn.com